Oops!

So I'm happily stitching away at my camicia sleeve and feeling good that I *finally* have the first pass of the pattern done on all the long "seam" edges. You know, thinking that I'm finally going to see some progress and get the full pattern stitched near the top and bottom of each row so I can assemble at least this one sleeve...

I'm working away at the acorns on an edge and I decide to unfold the whole piece a little more so I can see the two sections together and gloat a bit. Gloating about how pretty something is going to be keeps me going :) And this *is* pretty! I feel so clever and talented!...and then...hmm...

Then I realize that I've laid out my pattern in two different directions.

No! I was so careful! That can't be! But yes, most of the edges go one way but the first two, the section with the most stitching done, go the other way. Sigh.

So, I'm trying to put myself into the headspace of 16th century me. Do I take something out? Or do I just keep going.
Remember. Mechanized perfection is not the goal...

Aack!

OK calmer now.




Maybe it's not so bad.

On with the embroidery, etc.

Having realized that it will be a very long time before the pieces of my camicia are fully embroidered I have decided to take a new approach. I need the outer edges of each piece to be finished in order to do the assembly work, but the inner parts of the pattern?... Not so much.

Therefore I have decided to partially work the first line of stitching for the embroidery on all the borders-just the part up to the stems where the acorns break off. That will establish the over all pattern and I will be free to work the entire embroidery for a few repeats at the edges, assemble the garment, and work the rest as I have time.

It's still a pretty big project, but I feel a lot less restless knowing I'll be able to start some assembling soon.

IRCC3 - Blackwork version 3

OK, half size, single thread, I think I've got it!

IRCC3 - OK, blackwork version 2

I think it's better...but still not quite right. Maybe only 1 thread in the blue silk...

IRCC3 - lowering thoughts and lucky saves

Lucky saves come first:

As you may know, I'm working on the camicia for the challenge. I take it to work with me every day, wrapped up in a very un-period white plastic bag from the fabric store. Then I take it out at lunch and stitch away. Lately I have been noticing just how glaringly incongruous my transportation system is and considering more "plausibly period" alternatives, like wrapping it up in another piece of fabric, but today my silly plastic bag averted DISASTER when the olive oil from the pesto on my sandwich leaked everywhere. Especially all over the bag holding my sewing!

LUCKILY my project emerged unscathed, yay plastic bag! I'm sticking with you, bag. I'm sticking with you.

In other, less pleasant, news:

I have been merrily stitching along on my first band of blackwork...and slowly coming to the conclusion that it is the wrong scale. I deliberately made it so the little band of squares would be the same size as the square openings in my drawn thread work. I though they would compliment each other but I was so wrong! The blue squares totally overshadow the openings and the huge stitches just look childish on the pattern repeats so out it all comes and I try again. Say bye bye, version 1.

IRCC3 - And the drawn thread work is over too!

At least for now. :)

Moving on to the blackwork (in blue in my case)



I am still figuring outthe best path to follow when stitching this pattern but I like it!


and...hemstitching.



One of the interesting things about the new loosened up rule for the pre-commencement handwork in the IRCC has been picking out what is and isn't ornamental and since the hemstitching on the edges will be used to assemble I counted it as forbidden assembly work. Now that the challenge has begun I can legitimately get started and since I want my actual seams to match my drawn thread work bands I will be doing a row of plain hemstiching and a row of square hemstiching on the side edges of each panel.

Whew! That's over!

I've been madly working on many fronts, one of which being feast preparations for our local SCA Barony. We finally finished that project yesterday, it was fabulous, and while I am busy in my head with plans for an even better event next year my hands are back at work on my IRCC3 camicia. I've only got about 18" of plain hem stitching left to do and than I'm moving on to the blackwork!

IRCC3 - Plans for the camicia embroidery

As you may have noticed, the IRCC challenges seem to send me off into an overly ambitious frenzy in which I will attempt nearly anything if I think it will be pretty. This generally ends with my finishing out the challenge period with a new pile of half completed--gorgeous, but only half-completed--projects! I have been looking for an embroidery pattern to work in double running stitch on both sides of my camicia seams and seem to finally have settled on a pattern!

(Just in time too since I only have one and a quarter of the drawn thread work bands to do.)

There are a whole lot of very nice, very elaborate patterns out there which made my heart jump, but I settled on a very pretty simple pattern which may actually be possible for me to complete. Yay for sudden bursts of sense!

IRCC3 Camicia Sleeve #2 - First row of drawn thread work done!

It is possible that I am getting faster at this, which would be quite a relief since I am looking at so much more on the partlet. Speaking of which, while I'm waiting for my Margo's Patterns to get here (and trembling in anticipation) I've been pondering what I want to do with the collar. I don't really care for the netting pattern on the collar of my inspiration piece, nor do I want to go with plain fabric, so I think I'm going to go with more of the same drawn thread pattern....and possibly a macramé edging.

I know, you're most likely thinking 'but you already tried a macramé edging on a veil and got nowhere,' and, well, you'd be right. However I learned a lot in the process and one of those things is that the fabric I was using wasn't suitable for such work. I think this one may be. Since I will have to cut a length of fabric at least 10" deep to make gussets I think I'll make a test swatch from some of the scrap and see what I think. If it works I'll probably use the test for cuffs. (Which would also conveniently solve the question of whether I am going to make loose or cuffed sleeves. Bonus!) I've seen examples of macramé lace on partlet collars in portraits so I know it was done in period too.

And then there is the insertion stitch to join the pieces together. As it turns out, I only had to look a few minutes on Pinterest before I found a pin with the exact stich I was looking for. As I thought, I will have to put in the rows of hem stitch and square hem stitch at the edge of my fabric panels, and then make a WHOLE LOT of stitches to connect the panels together and then join them together into bundles, same as the drawn thread work I've already done. I think if I do it right they will be nearly indistinguishable, at least from a bit of distance. :)

Finally, musings on embroidery...pattern? color? What to do?

Hmm.....

And finally, progress on the IRCC3 layer 1 project

I've finished the three drawn thread bands which break my sleeve in four half-width panels. Well, I mean that I have finished the bands on my first sleeve. yippee! And I've started pulling the threads to repeat the pattern on the second sleeve. Progress is being made!

Layer 4 thoughts - Partlet

As I was working on the drawn thread embroidery of my Camicia a few days ago I came upon this glorious outfit courtesy of the Elizabethean Costuming facebook page. As I gazed on in awe I realized that the oversleeves and partlet are most likely/almost certainly draw-thread work, formed in large part by the same pea hole stitch I am using on the camicia!

How, exactly, one would get drawn-thread to work in a series of graduated rings as depicted in the partlet is a mystery to me at this point (if it can even be done!) but the sleeves are simple bands. THAT I can do. Thus my IRCC3 partlett was conceived.




In order to figure out the pattern before attempting to size it up into a partlet I cropped-out a detail of the flattest part of one of the sleeves, blew it up and started counting. On closer examination I feel that while this portrait is not an accurate-to-the-stitch recording of the pattern it does convey the feeling and approximate pattern and proportions well. I read the bunches as being sets of 5 bars taking up the space of 2 1/2 pea hole stitches in width and two pattern heights in depth. Two and 1/2 pea hole stitches are comprised of 5 bars so I feel good that my counting out various sections of the portrait sleeves has worked to establish a plausible pattern. I guess the next step would be to work up a test swatch. :)

IRCC3 - About that drawn thread work

I have to say that this stuff takes an incredible amount of time. Possibly the worst part of it is that the earlier steps kinda fool you into thinking it will work up fairly quickly...and then you suddenly discovered that you've done all of 4 inches in the last several hours and the horrible truth sinks in!

The pattern is pretty simple. Centering on the location of my 'seam', I pulled a vertical pattern of pull 2 threads, leave 4 threads, pull 7 threads, leave 4 threads, pull two threads. The outer two edges of are worked in a simple hem stitch in sets of 4 threads. (This is the part which goes quickly.) One of the bands of four threads is worked into sets by bracketing the edges of the square with stitching. (Four sided hemstich. Slower, but still feeling good.) And then the time comes to work the second band into sets while also attaching the ladder-rung-like groupings of threads the stitching has created together into X's. (Pea hole hemstich. Bang! It's three days later and it feels like nothing has been done.)

O.K. I'm doing a bit of exaggerating.

I started out using the linen threads I had removed to do the stitching but since I had already started into the threads removed from the sleeves before I completed the stitching on the body it was clear that there wouldn't be enough to complete the process. Rather than canabalizing the remaining fabric for additional thread, I have switched to cotton thread for the stitching on the sleeves. It doesn't match as well but gives a much cleaner finish and running out is not an issue.



Stitched with the pulled linen warp threads.

IRCC3--I'm in!

And while the counter ticks off the moments until the official start, I thought I'd share a bit of my thoughts so far as I work on the "extensive handwork" (which is allowable early work) on my camicia.

My pattern:

I decided to make the style which is simply assembled lengths of fabric with square gussets in the armpits but with a couple of changes from the plain cotton one I did about 10 years ago. (Which is still going strong, by the way.) Firstly, my new camicia is 100% linen in the body, and very sheer. I plan to embellish it to within an inch of it's life! I also plan to gather the neckline into a band this time, and to edge it with needle lace.

To begin I held the fabric up to my desired height for the finished neckline, measured and decided that I want a camicia that hangs about 36" from the neckline to hem. i then measured from the top pf my shoulder down my arm and decided that my sleeves also need to be about 36" in order to have length for puffings. I will need at least two full widths of fabric (a modern "56") in the body--three would be preferable--in order for the camicia to have the appropriate looseness around my frame. I will need another full width for each sleeve to maintain the appropriate proportions so I started by cutting 4 lengths of fabric.

I next considered the question of loom widths. I did consider cutting my fabric into narrower panels to mimick those available in period. I decided against it mostly because it seems to me that would introduce the weakness of a cut edge at the exact spot the system is meant to take advantage of the strength of a woven one. It seems to me that the system of constructing garments from basic shapes which make full use of the fabric as woven is a brilliant combination of the saving of time, effort and materials, flexibility of fitting, and using materials in such a way that their strengths are taken advantage of and weaknesses minimized. I can't imagine a Sixteenth century seamstress who needed to make a camicia for a woman of my stature cutting 45" wide fabric apart because she was used to a narrower width. I think she'd use what she had and thank her lucky stars for finding it!

That being said, I have noticed that camicie made from modern loom widths often look strangely 'wrong' to my eyes. I believe that is because the practice of embellishment at the seam lines has made the visual rhythm of those seams an integral part of the garment which we strongly notice when missing. Thus, I compromised by using the full width of fabric but introducing bands of embellishment at approximately the locations which would have been seams in period.

I believe that one period approach to my camicia could have been to supplement the traditional four body panels with half-width panels set in at each seam. I have worked my bands of drawn-thread lace at 1/4 and 3/4's the breadth of my panel to approximate the front, back, and four inserted 1/2 breadth pieces of this hypothetical approach. You will have noticed that I still need the side panels...

They are coming. After I finish the drawn-thread embroidery on the sleeves!

Historical Sew Fortnightly Challenge #11 - Hmmm...A Shift!

Am I being bad? Hmm...I'm really not sure.

I have the materials for my "Peasants and Pioneers" project, but not the inclination so I've started on the project I do have inclination for: Squares, Rectangles and Triangles. I've been thinking for awhile that I wanted to try a highly embellished camicia--from scratch. And as the days wind down to the commencement of the IRCC3 my mind has wandered to embroidery patterns, and needle lace edgings, and the 10 yards of sheer white linen (IL030) I bought when it recently went on sale at fabrics-store.com.

I pondered. And I thought. And I mused, and I pinned. And then I took up my scissors and started cutting!

And now, about 8 1/4 hours into the beyond-the-cutting-phase part of the project I am well on my way to my first completed bit of embellishment. Details will follow later but for now let's just look at my pretty pretty pulled-thread work!

IRCC II - Tasty Nibble #8

More shopping...

Blackwork, oh my!

Surely one of us needs this?

I think the universe it trying to tell me something

Like that it's time to be getting started on my camicia!

Have you been reading Baroque Embellishments lately?

I'd call that a sign...

Tasty Nibble #11

My pocket has tassels!

They dangle, and bounce around, and are just unbelievably cute!

SURPRISE!

Tasty Nibble #10 - The Pocket Embroidery is Done!

Done done done!