New Sewing Room Toys, Tools! I mean tools!

I may have gotten the idea from Pinterest, I really don't remember, but I saw this strange iron contraption on the internet the other day and thought 'Hey! I NEED that for my sewing room!' I love love love my new cone thread holder (aka bottle drying rack) especially since I have finally figured out a way to set up my cone thread to feed into my machine smoothly and easily! No falling on the floor and rolling around. No snagging and snapping. Just sewing! Love it.

The thread glides because I take the cone I am using and set it in the center, the thread goes up from there and over the top ring, then into the guides of the machine. As you may be able to see, I'm using one of the spool holders as a guide to keep the thread coming from a similar direction as it would if it were on the machine itself. Works like a charm! COMPLETELY unlike that weird plastic cone thread holders the sell at the fabric store these days.

IRCC4-feathery progress

After curling the plumes I used the same thread binding technique to assemble some plumes into multicolored sets.

IRCC4 - Wow, Feathers take a lot of prep work!

But all my 48 are now trussed up in sets of two and curling has commenced. The nice part is that the curling is dead easy and goes fast!

IRCC4 - Feather work commences

When I was working on my last feather fan I discovered an excellent tutorial regarding creating full beautifully shaped ostrich feather plumes: http://lynnmcmasters.com/OstrichPlumes.html.

In my opinion the feathers for this year's fan shouldn't be all that long, but they do need to be lush and curvy so the first step is to take the feathers I purchased and convert them into plumes! Interestingly, the process is rather like tying up a roast. You create a series of connected loops which hold the feathers together and tie them off at the end. I did mine thus:

Match feathers together in sets of two as best you can. I look for feathers which are similar in length and curve and which will complement each other when assembled. This means that I wouldn't pair together two feathes which were both skimpy on the right side, but I would pair a right-side-skimpy feather with a full or left side skimpy one.

 I stack the better looking feather on top of the less handsome one, flip them over so I am facing the backs and match the tips so the lengths look well. I take a needle threaded with a length of thread approximately three-to-four times the length of the feathers I'm working on and take a stitch around the stem by sticking the needle between the quills of the feather and coming back on the other side.

Then I tie the two ends of the thread together in a square knot, leaving one tail extending about 5" past the length of the feathers and the other with the bulk of the thread on the needle.

And then I get a little wild. I left the long tail because I want to be able to tie off in a square knot also, but I don't want the bulk of two threads when I'm stitching the feathers together so I lift the upper feather and work the thread clear of all the quills so that I can run my long tail down the center spine between the feather layers.

Once I close my little feather and thread sandwich back up I start stiching them together just as instructed, making a chain of loops to encase both spines and my thread tail.

I make multiple loops at the end an finish it off with another square knot.

To finish I rescue any trapped quills by pulling them out with a pin so the whole feather looks beautiful

Much better!

IRCC4 - Mango, Marigold, Ivory, Beige. The Feathers are Here!

This year's inspiration fan is a fluffy multicolor marvel.

Since the feather selection in my town has dropped off considerably of late (and it was never good) I decided to finally try getting feathers on the internet. Did you know they come in colors? LOTS of colors! And many sizes, types and prices too. The inspiration fan strikes me as being fairly equal amounts of four different colors. I got 4 12-packs of dyed ostrich feather drabs in the 9"-12" length.
I plan to pair them up and stitch them together to make 6 plumes of each color. Perhaps I'll have extras!

IRCC4 - Parts for my fan have started to arrive

After a short stint of shopping on e-bay I found a great option for a metal frame for my first accessory item. I think this hairbrush will make a great feather fan!

Step one was to take it apart. The brush is held in the frame with three short nails so I just pried them up and pulled out the bits I found.

As you can see, there's quite a lot of stuff in there!

The original brush-head is wood and perfectly shaped to fit the frame so I will probably try to use it to hold my feathers. I think I can remove what remains of the original bristles pretty easily (they are in the disintegrating phase) and if I drill the original holes all th way through the board I should have lots of attachment points.  Now I just have to keep resisting the urge to use it as a giant bubble wand!

My feathers are due to arrive today or tomorrow so I hope to make some progress on this layer this weekend.

IRCC4 - Busy, busy , busy!

I find it hard to keep it simple. I may be the very last to discover this fact, but it's true! :)

Since I can't yet bear to pull out the blue silk embroidery from the sleeves I stated for a camicia for last years IRCC (3)--nor (apparently) can I stand to finish that embroidery--I was a short some pieces for my new Franken-camica for IRCC4. After much hem-ing and haw-ing I decided to use my original front and back panels as the sleeves for this camicia and add new panels for the body of the dress. And then began the debate about finishing...hemstiching...insertion stiching...maybe I should just go ahead and finish the original sleeves after all....

Eventually I was able to reason with myself and stich together

 and hem.

 

This whole thng goes a lot faster when I'm not fancying it up!