IRCC3 Project 4....something.....done!

I scampered off to the store today to get some more supplies for my golden chain girdle, more acorns and jump rings, but discovered that they did't have any jump rings which compared to the ones on the original acorn chain which I had been using to assemble the belt. Given the choice of going smaller or larger in diameter I went with larger.

I assembled the belt so that the acorns on both ends are top up, pointy end down when the belt is being worn, but that meant I needed to do some fancy maneuvering to end up with two acorns with their caps back to back at my spine and sufficient chain in front to fall under the waist point of a Venetian bodice and also enough dangling chain to hold and use the fan. But not so much the fan dangles on the floor when I'm standing! I think I had it figured out pretty well, but then I ended up making some changes to my belt. So I guess we'll see when it all comes together.



As you can see from the picture, above, the original jump rings were small enough that they drew two links they were joined to together and caused a small gap between the links of the main chain. I loved the intricate, interlace look that gave the girdle, but it also substantially weakened and shortened the girdle so I ended up replacing all the jump rings with my new, larger, rings.



It all hangs quite smoothly, now.