Kill the napkin. Kill the napkin. KILL that napkin!

Ok. Thursday night? I was very luck to shoot an arrow into the back board of the target. The grass of our local archery range and I got very well aquainted. But today? All but 5 of my arrows hit the back board and four of them hit the target!

See!?!



Four of those holes are MINE!

Of course, I can't quite remember which four of those holes are mine but I know I had a nice triangular grouping, not on the edge, in the last round of shooting. Woohoo!

Oh. And by the way, the quiver worked very well and I'm pretty sure it helped. The said it was important to leave your feet in place and approach the shot the same way each time so I could figure out what to adjust to improve my aim. The quiver means I don't have to scramble around on the ground for my arrows and lets me stay focused. :)

And Clarence used the bow Jessi lent me and it works! I'll have to build up some muscle before it will work well for me, but it is so nice to have at least one bow to bring to the local shoot. Now I just need to get my arrows tipped...

Yep. Hooked. They even have us talking about getting war points at Pennsic!

What will that girl do next? Archery!

After a couple of years of thinking about it and saying I was *going* to do it I finally got myself off to an archery practice this week. So much fun! Seriously, even with my complete inability to hit the target. (I did hit the back board a few times. :) ) I loved it! I think both Boen and I may be hooked.

We are at least interested enough to be going to our Barony's archery practice tomorrow and in the last hour or so I have suddenly developed an intention to make a hip quiver! I confess I was inspired by a photo set I found through the good offices of Pinterest. Evrard Archer has posted a wonderful set of photos on Flicker at http://www.flickr.com/photos/23516362@N00/sets/72157625860081799/with/5980908926/ and they contained enough information--including a pattern-- to get me thinking that it was something we could do. Thank you, Evrard Archer! I hope I am someday lucky enough to take your class!

Since I hope to have a useable quiver tomorrow and no leather in the house I am throwing something together from stuff I do have, fabric, metal rings, and a cream cheese container.

Here goes!

The container is approximately the size of the finished size of the bottom from his pattern and will keep the arrow tips from puncturing the fabric. At least that is the plan.





I cut off the bottom of the container about an inch up the side, cut a disk from the lid the right size to make a double thickness of plastic at the bottom, and cut the remainder of the side at an angle to make a support for the top of the quiver.




Some rather random cutting and stitching later and I have this





We'll be adding straps tomorrow when we try it out to see if it helps. Believe me, I need all the help I can get!

IRCC3 - Whew! It's over and I am TIRED!

I'm also not done, as my bodice has yet to be started and the camicia embroidery project may well outlive me, but I finished my final report and can now rest and speak to my husband for a few days before recommencing. I think he will like that :)

IRCC3 - All hemmed! Hmm...Now I guess I need a bodice...

Moving on with my hem, I ran another row of prick stitch through the all the layers about 1/2" from the edge of the hem on the fashion fabric thereby encasing the original cut edge and reducing the chances that my clipped hem finish will cause the main body of my doppia to fray. (Essentially, it's for seam allowance!)



I then flipped the facing fabric back toward the outer edge and ran a row of running stitch through the inner layers over the original seam securing the skirt and facing together.



Flipping the facing back again I have the look want, a separate tiny band of facing fabric sandwiched into the seam, and also enough stiffening from the build-up of the successive folded layers that I decided I didn't need to add any cording.



I double folded the remaining facing fabric and positioned it so the leading edge of the four thicknesses buts into the edge of the encased hem. Stitched in place, clipped, ironed, Voila!

Fear, I'm facing you!

Well, I finally gathered up my courage and started on the hem of my skirt. First step, rounding out the train



I just folded the fabric in half and cut a freehand curve to round out the corner. This is still too square, but with the seam allowance turned under and the back panel gathered into the waistband I think it will be just right.

Second step, turn under the hemline of the skirt about 3/8" and baste in place. Third and fourth steps, cut 5" wide bias strips of bias hem facing, sew together, turn under about 1 1/2" on long edge, pin in place on skirt hem, wrong sides together and with the hem facing extending past the fashion fabric of the skirt about 1/4".






Fifth step, stitch hem facing in place. I used a running stitched worked thru the hem facing and the turn back of the hem on the fashion fabric. The stitches don't show on the right side of the skirt.






I'm trying out a doppia(padded hem) but I can't find the wool felt I purchased for the purpose so I think I'll make do with the linen facing and a row or two of hemp cord. And a heck or a lot of stitching!

IRCC3 - Sottana skirt is assembled!

I finally finished all the stiching and my skirt pieces are together. As you can see, I still need to figure out the shape of the train (and possibly piece in some more triangles to soften the curve, but I am happy to say that I like the look, there will still be enough at the waitline for gathering, and I think there is enough sweep at the bottom that I won't feel like I am wearing a column dress even though I only used 2 1/2 lengths of fabric. (OK> Techcnically it is 3 lengths and 2 1/2 breadths. I hope I didn't confuse you. :) )


The view from inside - You can see all the pieces, front panel, two triangles from the 1/4 width piece, one triangle which was removed from the back panel and flipped, back panel




A close up of the inside seams




The view from outside - Once again you can see all the pieces




A close up of the outside seams

IRCC3 - Skirt front is assembled

Now I'm working on the back. :)