IRCC3 Project 4....something.....done!

I scampered off to the store today to get some more supplies for my golden chain girdle, more acorns and jump rings, but discovered that they did't have any jump rings which compared to the ones on the original acorn chain which I had been using to assemble the belt. Given the choice of going smaller or larger in diameter I went with larger.

I assembled the belt so that the acorns on both ends are top up, pointy end down when the belt is being worn, but that meant I needed to do some fancy maneuvering to end up with two acorns with their caps back to back at my spine and sufficient chain in front to fall under the waist point of a Venetian bodice and also enough dangling chain to hold and use the fan. But not so much the fan dangles on the floor when I'm standing! I think I had it figured out pretty well, but then I ended up making some changes to my belt. So I guess we'll see when it all comes together.



As you can see from the picture, above, the original jump rings were small enough that they drew two links they were joined to together and caused a small gap between the links of the main chain. I loved the intricate, interlace look that gave the girdle, but it also substantially weakened and shortened the girdle so I ended up replacing all the jump rings with my new, larger, rings.



It all hangs quite smoothly, now.

IRCC 4d? Anyway, It's another accessory! (or part of one)

You know how it is.

I finished my fan and spent a couple of days glorying in my accomplishment...and then I started thinking that now that I have a feather fan with a hanging ring I need a girdle to hang it from. So I go to the hardware store and buy a package of a nice, slightly ornamental, gold colored chain and I'm thinking "OK. I got the chain. Now I go home, measure out the correct length, bend some hooks, throw it together and hit it with Rub n' Buff so it kinda matches the fan. Done!"

Of course, that's not how it's working out. :)

Once I had the chain home, and the fan attached, it just started seeming...skimpy. It is nice chain, and the correct scale but it needed more ornamentation to complement the fan. I was pondering the possibilities of wired on filigree pieces, or pearls. Then it occurred to me that the leftover acorns from my hairpin project were a good size for putting in the spaces between the links and a few minutes later my new girdle was begun! I'm suspending the acorns between two links so they fall in the middle of the alternate link and I like the look and feel a lot but the whole project is on hold overnight because I need more jump rings.

In the morning I'll be off to the store and I'm hoping to return with more of the acorns and jump rings plus thread to match the sottana which I am finally working on. (Surprise!)

The original chain, disassembled, and reassembled

Why I love e-bay #327

This!



Now all it needs is a reticella edging and it will be the perfect hankie.

IRCC3 Layer 4b Update: The Orsi fan is finished!

After the gold paint dried I discovered that while it was wonderfully shiny it was that horrible green-gold color that I loathe in metallic spray paint. Luckily, I had provided myself with an alternative, Rub n' Buff!

I had never used it before, but after years of watching it transform items on HGTV I just had to give it a try. I love it! It warmed the color right up, smoothed out minor imperfections in the surface and makes a lovely texture to hold.

The next step was steam curling my Ostrich plumes and the three smaller single feathers I got for the front side of the fan. I only did the upper 1/4 of the larger feathers but I curled the entire length of the front feathers. then I stuck the feathers in their slots and stuck in some shredded toilet paper between the feathers to hold them in place while still making it easy to remove and replace the feathers if needed.

Done!

IRCC3, 4b - pre assembly prep work on the fan

I've realized that I neglected to chronicle and photo document the most important part of the fan--most important from a structural perspective, at least--the top opening and double pockets where the feathers will be inserted!

As you may remember, I made a cardboard spacer which I tied to the central upright oval of craft wood I had attached to the wood candleholder which forms the base of my fan handle. I then built up an outer layer of plastic wood which I have since used as the base for my paperclay top coat. I removed the cardboard spacer a while ago and have been carefully preserving the opening as I completed the adjoining sculptural elements.


Side view of the fan featuring the dragon's head




And the top opening.






I am planning to make my feathers white on the front and black on the back and it seemed to me that support between the layers would be a good thing--thus the double pockets. I assembled the main feathers by stitching the spines together in pairs (the thread wraps around the front of the rib and then loops around itself and is carried up the back of the feather to the next stitch, rather like tying a roast) using the instructions in Lynn McMaster's article, How to Create Ostrich Plumes. I plan to curl the feathers too and then assembly is next!


Tonight I painted the fan gold. After it is fully dry I'll decide if that is enough or if it needs additional painting but here is a peek.

IRCC3 Layer 4b-Fan handle sculpting is complete!

I added the final flourishes to the dragon-leafy things that stick out at the sides of my fan and managed some passable leaf shapes on the lower handle which left me with only the uncharted territory of the back to address. Orsi's design doesn't include a reverse image so I set out to look for something suitable...without much luck until I had the happy thought of looking at Orsi's's other work and found this frieze with a suitable cartouche

Ornamental Frieze

Lelio Orsi (called Lelio da Novellara)  (Italian, Novellara 1508/11–1587 Novellara)

Some day I'll actually have a registered device which I will paint onto it!

Back

Front


Hopefully I'll move on to painting tomorrow.

IRCC 4b- More pretty pictures of the fan in progress

One interesting thing about the paperclay is that it doesn't particularly want to stick to the dry version of itself. I was using it more like plasticine--adding it in layers and attempting to work to a level of perfect detail--but paperclay seems to respond better to a freer approach. I've been wetting down the dry surfaces to make them more receptive to additions and now I'm trying to work on larger areas in one go.

I notice that the pieces have a lot more life and it feels great to be getting things moving!